31*5.7mm Low Volume Insert Suit for Autosampler vial Fisherbrand Aijiren micro insert with mandrel interior and polymer feet 300uL Micro-Insert, 31*6mm Clear, Flat Bottom, Suits for 11mm Snap Ring Vials: 250uL Conical Micro-Insert, 31*5.7mm, Suits for 11mm Snap Ring Vials: 250uL Micro-Insert with Mandrel Interior & Polymer Feet, 29*5.7mm, Suits

Micro inserts are placed and sealed inside a vial so they can be used in conventional autosampler racks. The smaller 6 mm diameter of the insert gives better sample recovery than a routine flat based vial; with conical inserts being most effective with residual volumes of 1-2 microliters.

Variously sized inserts designed for use with chromatography autosampler vials; designed to hold a specific sample volume. Filter By 1 – 30 of 49 results 1 Fisherbrand™ Micro-Insert, Clear Glass, for Wide Opening Vial Wide opening vials require Inserts with 6mm diameter. 2 Fisherbrand™ Spring for Micro-Insert, for small opening vial

Micro inserts are placed and sealed inside a vial so they can be used in conventional autosampler racks. The smaller 6 mm diameter of the insert gives better sample recovery than a routine flat based vial; with conical inserts being most effective with residual volumes of 1-2 microliters.

Vial inserts are used to reduce the capacity of the vial to accommodate smaller samples. Typically 150 to 400µL in volume, they may be made of glass, plastic, or a combination of materials. Closure options include those with and without septa, snap caps, screw caps, and crimp top caps.

Electrophoresis, Western Blotting and ELISA; Precast Electrophoresis Gels; Primary Antibodies

Catalog number: C4011-S631. Related applications: Chromatography. Technical Support Customer Service. Clear glass or polypropylene inserts for 9mm HPLC and GC autosampler vials are available in a variety of configurations with usable volumes from 160μL to 3.5mL. Product Overview.

Vial inserts basically permit the use of smaller sample volumes with standard autosampler vials. Inserts are generally chosen based on the inner diameter of the vial neck. Standard opening vials (4.6 mm ID) require a 5 mm OD insert. Compare this item Insert for 2 mL standard opening vial MilliporeSigma

Home / Bioflow Consumables / 250µl Micro-Insert with Mandrel Interior and Polymer Feet, 29*5.7mm; suits for 9mm Vials (100psc/pack) 250µl Micro-Insert with Mandrel Interior and Polymer Feet, 29*5.7mm; suits for 9mm Vials (100psc/pack) $ 0. Availability: 10 in stock

Autosampler Vial Inserts Thermo Scientific™ 9mm Autosampler Inserts Clear glass or polypropylene inserts for 9mm HPLC and GC autosampler vials are available in a variety of configurations with usable volumes from 160μL to 3.5mL.

Dec 21, 2021 · ACQUITY. UPLC. H-Class. ANSWER. WAT094171 - INSERT,150 µL PREINSTAL SPRING (100) fits the 12x32mm ACQUITY vial formats. ADDITIONAL INFORMATION. This LVI fits into vial 186000307C -12x32 Gls Srw Cap Vl w/Bnd pre-slt septa. id65295, UPBINARY, UPQSM, UPQSM+, UPQSMBIO, UPQSMBIO+, UPSMFTN, UPSMFTN+, UPSMFTNB+, UPSMFTNBIO, UPSMPMGR.

Fisherbrand™ Glass Autosampler Vial Inserts. Fisherbrand™ glass autosampler vial inserts are available in precision point and flat bottom profiles and are compatible with 9 mm HPLC and GC autosampler vials. Height (Metric) 31 mm. Diameter (Metric) Outer.

Our “low volume inserts” for autosampler vials are among the best and are market leading inserts worldwide. These inserts allow liquid samples, with very small volumes, to be accurately injected into your instrument with minimal evaporation or loss of sample due to the low “residual volume” or adsorption to the insert walls.

Fisherbrand™ Glass Autosampler Vial Inserts. Fisherbrand™ glass autosampler vial inserts are available in precision point and flat bottom profiles and are compatible with 9 mm HPLC and GC autosampler vials. View more versions of this product. Catalog No. 13-622-218.