Autosampler HPLC Vials, 2.0mL with Large Opening Chemglass Designed to work with robotic arm or other auto samplers. Choose from clear or amber borosilicate. This vial also incorporates the unique Step Vial design that precisely centers a limited volume insert in the vial neck. Available with or without graduated marking spots, and silanized.

Electrophoresis, Western Blotting and ELISA; Precast Electrophoresis Gels; Primary Antibodies

Dec 21, 2021 · Note: To improve the accuracy of this test, handle the vial with forceps to ensure that the vial is as clean as possible. 1. Fill a standard vial with methanol or water. 2. Seal the vial with a Teflon Septum and cap. 3. Zero the analytical balance, carefully weigh the vial, and record the weight. 4. Place the vial in the carousel and set the

4 VWR INTERNATIONAL | VWR ® AUTOSAMPLER VIALS, INSERTS AND CLOSURES Wide Opening Screw Thread 89239-016 46610-710 89239-018 89239-020 89239-022 VWR® 9mm Wide Opening Screw Thread Vials 2mL, 12x32mm, 9mm Wide Opening Screw Thread Vials and Inserts • Write-on patch with graduation for convenient sample identification

Micro inserts are placed and sealed inside a vial so they can be used in conventional autosampler racks. The smaller 6 mm diameter of the insert gives better sample recovery than a routine flat based vial; with conical inserts being most effective with residual volumes of 1-2 microliters.

11mm Autosampler Inserts Thermo Scientific™ Thermo Scientific™ National 11mm Autosampler Vial inserts are made of clear glass or polypropylene and available in a variety of configurations for use with HPLC or GC autosampler vials. Usable volumes range from 250μL to 450μL. 8mm Autosampler Inserts Thermo Scientific™

Glass Insert, 250 µL Volume, 100/pk. To offer ideal needle conditions when sample volume is limited, it’s important to use a Glass Insert in your sample collection vial. This glass insert, available in a pack of 100, offers 250 µL in volume and it sits securely within your vial. To operate properly, you also need a glass insert spring (PN# WAT072708).

Chromatography Autosampler Vials Only. Containers/vials designed for use with chromatography autosamplers; designed to hold small amounts of liquid and commonly made of glass or plastic.

Autosampler vial Includes Vial, Cap, & Septum Sample Limited Sample Limited UNSPSC Application Sample Preparation Product Type Vials Units per Package 100 pk SKU: 186005663CV TruView pH Control LCMS Certified Clear Glass, 12 x 32 mm, Screw Neck Vial, Total Recovery, with Cap and preslit PTFE/Silicone Septum, 1.5 mL Volume, 100/pk

Chromatography Autosampler Vial Inserts. Variously sized inserts designed for use with chromatography autosampler vials; designed to hold a specific sample volume.

Buy Products: Autosampler: Waters 2695 Clear All Certified Glass Type Format Vial Dimensions Vial Closure Type Go To 26-50 of 91 Results To see prices, Login or register your country here. Go To 26-50 of 91 Results `

Part Number: WAT094174. Waters offers a selection of cap, septum, and assembled cap/septum for various vial sizes. The range of septum material is limited to PTFE, silicone / PTFE, and polyethylene septumless caps. Black, Screw Neck Cap and PTFE/silicone Septum, 100/pkg.

Insert for 2 mL standard opening vial MilliporeSigma Vial inserts basically permit the use of smaller sample volumes with standard autosampler vials. Inserts are generally chosen based on the inner diameter of the vial neck. Standard opening vials (4.6 mm ID) require a 5 mm OD insert. Compare this item Insert for 2 mL standard opening vial

Autosampler Vial Inserts Thermo Scientific™ 9mm Autosampler Inserts Clear glass or polypropylene inserts for 9mm HPLC and GC autosampler vials are available in a variety of configurations with usable volumes from 160μL to 3.5mL.

Designed for LC-MS analysis in autosampler ready formats with low residual volumes in 700 µL 96-well plate and 300 µL sample vial formats. Increase analyte recovery, sensitivity and reproducibility by minimizing analyte/surface interactions that can lead to sample losses with MaxPeak High Performance Surfaces (HPS).