Shop Waters Corp LCGC Certified Clear Glass 12 x 32 mm Screw Neck Vial, Total Recovery, with Cap and PTFE/Silicone Septum, 1 mL Volume, 100/pk at Fishersci.com Waters Corp LCGC Certified Clear Glass 12 x 32 mm Screw Neck Vial, Total | Fisher Scientific

Thermo Scientific™ headspace vials are available in clear or amber glass with a round or flat base, a crimp seal with a beveled or square edge finish, or with a screw-thread finish. Headspace vials, septum, and caps can be purchased in various quantities separately or together as convenience kits to fit your laboratory needs. Product Overview

Autosampler Vial Crimpers and Decappers Autosampler Vials, Caps, and Closures Chromatography and Mass Spectrometry Reagents Chromatography Columns and Cartridges Chromatography Syringes Chromatography Water Gases and Gas Accessories Paper Chromatography Products Solid Phase Extraction Products TLC Products Chemicals Chemicals Acids

For a convenient, versatile, and cost-effective vial and closure system, choose Thermo Scientific™ Screw Cap Septum Vials. Made of autoclavable borosilicate glass and available with a wide assortment of special closures and accessories, these vials are ideal for sample collection and small derivatization reactions for use with automated gas (GC) and liquid chromatography (LC), and for

Typically made from polypropylene or phenolic resin (with a variety of closure liners, including PE foam, PTFE, cork, tin, etc.) Flip-top Caps for plastic sample vials may be attached by a tether to the vial itself Also called “captive” closures Snap caps (external): Both glass and plastic sample vials

Vial inserts are used to reduce the capacity of the vial to accommodate smaller samples. Typically 150 to 400µL in volume, they may be made of glass, plastic, or a combination of materials. Closure options include those with and without septa, snap caps, screw caps, and crimp top caps.

Amber Screw Thread Vials with Phenolic Cone Lined Caps Glass Vials permitting a positive seal, ideal for a variety of uses including laboratory or manufacturer’s use. These vials are available in a wide range of sizes and packaged in attractive, white low-particulate cardboard boxes.

High recovery vials are - from the outside design - standard vials, however, with a solid glass bottom with an inner cone in it. This way they offer a very low residual volume with a high total volume at the same time. In addition they don’t need any adapters to run in an autosampler, as require micro-vials with a conical bottom.

As with all lines of Waters vials, the Clear Glass 12 x 32 mm Screw Neck Vial with Cap and Preslit PTFE/Silicone Septum, 2 mL, Pre-Assembled for Dissolution Systems uses strict adherence for dimensional tolerances for height, width, neck opening, neck center, threads, and bottom thickness specified for autosamplers.

The injection and screw neck vials are manufactured according to ISO 8362 and ISO 11418. It is also possible to produce vials according to customer specific demands and to non ISO standards. NAFVSM vials are produced out of clear or amber borosilicate glass of the first hydrolytic class. In our automated process the vials are annealed at 600 °c.

Use the Waters Clear Glass Screw Neck Vial, with Cap and Preslit PTFE/Silicone Septum, which was developed specifically with chemically inert glass for chromatographic analysis. Because the glass is inert, you will not experience any interference with your samples, analytes, or analysis findings.

Vial category: Micro-vial: Vial type: Screw neck vial: Nominal diameter: N 9: Vial material: Clear glass, 1st hydrolytic class glass: Vial dimensions: 11.6 mm x 32.0 mm: Vial diameter: 11.6 mm: Vial height: 32.0 mm: Usable volume: 1.1 mL: Vial opening: Wide: Silanized: No: Additional vial features: 15 µL funnel in solid glass bottom: Bottom

Any combination of 4 ml screw neck vial ND13, with one of the 13 mm PP screw seals, can be ordered as a 2 in 1 kit. Barcode labelled vials can also be supplied on request. For storage purposes, also available with closed top screw seals. Delivery information: Kits include: 4 ml glass screw cap vial (14,7×45 mm), PP black screw cap with 8,5 mm

Fisherbrand™ Glass Screw Neck Specimen Vials. Store specimens securely with squat or tall form glass vials. Fisherbrand™ Glass Screw Neck Specimen Vials are available in a variety of sizes. Fisherbrand™ polypropylene screw caps are sold separately. Use promo code "19149" to get your promotional price. to see stock.