Part Number: WAT094174. Waters offers a selection of cap, septum, and assembled cap/septum for various vial sizes. The range of septum material is limited to PTFE, silicone / PTFE, and polyethylene septumless caps. Black, Screw Neck Cap and PTFE/silicone Septum, 100/pkg.
Certified IP250 chromatography autosampler vial inserts suit Waters 8-425 screw vial ND11 crimp vial ND11 snap vial ND9 screw vial Volume 0.3ml vials 1.5ml/2ml vials 10ml vials 12 Email: email@example.com
All Waters sample vials are held to the tightest dimensional tolerances. Manufactured via a 2-, 3-, or 4-step certification process, we ensure that Waters Certified Vials meet and maintain specified vial dimensions, levels of cleanliness and adsorption properties from batch to batch. Find the right vial for your application and autosampler
13mm Autosampler Inserts Thermo Scientific™. Thermo Scientific™ National 13mm Autosampler Vial Inserts are made of clear Type 1 Class A borosilicate glass and available in two configurations for use with HPLC or GC autosamplers. Usable volumes range from 350μL to 850μL. [Bullet] Conical inserts offer a low residual volume of less than 8μL.
Dec 21, 2021 · 717plus Autosampler PROCEDURE Injection Volume Accuracy when using the standard 250µL syringe Note: To improve the accuracy of this test, handle the vial with forceps to ensure that the vial is as clean as possible. 1. Fill a standard vial with methanol or water. 2. Seal the vial with a Teflon Septum and cap. 3.
Format. Vial Dimensions. Vial Closure Type. QuanRecovery Vials and Plates Reduce sample losses due to non-specific binding (NSB) and ionic interactions with QuanRecovery Vials and Plates with MaxPeak High Performance Surfaces. Learn more. Sample Vials Reduce failed assays with Waters glass and plastic autosampler vials and high sample recovery vials - certified/tested by HPLC, GC, and MS.
Headspace vials with 20 mm crimp tops and 18 mm screw tops in sizes ranging from 6 mL to 20 mL are available in clear or amber glass. Choose from a round or flat base with a beveled or square edge finish. Round base vials are compatible with most autosamplers and are more easily handled by robotic arms that lift the vial from the tray.
High Recovery Vials & Inserts Part Number: . Vial insert, 250 µL, glass with polymer feet, 100/pk Insert size: 5.6 x 30 mm Add to Favorites
We carry vials by the top brands such as Aijiren Technologies, Supelco, Thermo Fisher Scientific and our own qualtiy brand Altmann. - Vial type: Crimp, Screw cap fine, Screw cap micro, head space, short thread, snap cap - Vial material: amber glass, clear glass, PP, TPX - Diameters: 11mm - 33mm, ND8 - ND24 - Vials height: 30mm - 140mm
VWR® AUTOSAMPLER VIALS, INSERTS AND CLOSURES | VWR INTERNATIONAL 3 8mm Standard Opening Screw Thread VWR® 8mm Standard Opening Screw Thread Vials 2mL, 12x32mm, 8mm Standard Opening Screw Thread Vials and Inserts • 8-425 thread finish • Vials feature a write-on patch with graduation for convenient sample identification
Dec 20, 2021 · ANSWER. The syringe needle of an autosampler does not go all the way to the bottom of a vial, so some sample always remains. This is referred to as the "residual volume" of the vial. Some vials have a tapered bottom, which decreases the residual volume. This can be important if the sample is valuable or if only a small amount is available.
6 ®VWR AUTOSAMPLER VIALS, INSERTS, AND CLOSURES | PLACE YOUR ORDER TODAY AT VWR.COM, OR CALL 1.800.932.5000 VWR® 10mm Wide Opening Screw Thread Vials 2mL, 12x32mm 10mm Wide Opening Screw Thread Vials and Inserts • 10-425 thread finish • Vials feature a write-on patch with graduation for convenient sample identification
For use with Waters Autosampler. 1mL vials made from clear borosilicate glass and for use with 96-position autosampler; 4mL vials made from Type I, Class A clear borosilicate glass and for use with 48-position autosampler; This product(s) resides on a Fisher Scientific GSA or VA contract.