MicroLiter limited volume inserts are made from Type 1 borosilicate glass or polypropylene and meet strict tolerances. Conical inserts, inserts with plastic springs, and flat bottom inserts are available to assist in consistent sampling of low-volume samples. Promotions are available 15 Thermo Scientific™ 11mm Autosampler Inserts
Micro inserts are placed and sealed inside a vial so they can be used in conventional autosampler racks. The smaller 6 mm diameter of the insert gives better sample recovery than a routine flat based vial; with conical inserts being most effective with residual volumes of 1-2 microliters.
Micro Insert is used to ensure the most accurate and reliable analysis of your lab samples. Micro Inserts decrease the surface area inside chromatography vials, enabling maximum sample recovery. Our micro-insert products are available in conical bottom, flat bottom, conical bottom with polyspring. Product Code & Description:
Thermo Scientific SureSTART Polyspring Inserts for 2 mL Vials Use SureSTART™ Performance Level 2 Polyspring Plastic Inserts in 2 mL screw, snap, or crimp top vials when analyzing small sample sizes of less than 2 mL. Polypropylene Micro Vial with Polyspring US-Aijiren 2ml Choose from these economical alternanatives to glass vials.
Micro-inserts are used to reduce the volume of standard sample vials for application with very small sample volumes. The benefit of using inserts is less surface area; therefore it is easier to withdraw the sample. Inserts are placed into a regular vial; vials are closed as usual.
300µL Polyspring Insert Clear – 6x29 Conical 375µL 300µL <1 03-391-35 100 Polypropylene – 6x30 Conical 325µL 250µL <2 13-622-217 100 400µL Flat Bottom Insert Clear – 6x31 Flat Bottom 500µL 450µL <25 13-622-218 500 350µL Insert Clear – 6x31 Precision Point 400µL 350µL <2 13-622-216 100 Description Cap Color Cap Material Septum
Features High-recovery vials enable sample concentration and injection without transferring to microvolume inserts Micro-sampling vials offer a lower cost alternative to high-recovery vials Conical inserts with polymer feet virtually eliminate dead volume and act as a shock absorber for needles Flat bottom inserts are fitted to vial dimensions
Use Thermo Scientific™ Polyspring Plastic Inserts with 2 mL screw, crimp, or snap vials to maximize injection volume when analyzing <2 mL samples. The integral Polyspring at the bottom of the insert centers the insert in the vial, ensures a good seal with the vials’ cap, and provides a cushion against needle contact.
Aug 05, 2016 · Plastic Vials ND9 and Plastic Micro-Vials ND9 *Temperature resistant from -20 °C up to 100 °C *Available With 9-425 Seals with centre hole or Closed top. Conical Base with Polyspring
Home » News » lab vials » VWR polyspring micro insert with assembled plastic spring VWR polyspring micro insert with assembled plastic spring Material: USP Type 1, Class A, 33 Borosilicate Glass Volume: 2ml (standard volume) 1.5ml(actual volume) Application: HPLC and GC system Dimensions: 11.6 x 32mm Neck Diameter: 9mm Qty/Pack: 100pcs/pack
Fixed Insert Microsampling Vials • Residual sample volumes as low as 1μL • Working volumes up to 1.2mL • Stable base profiles prevent tipping • Variety of closure options available Phone: 1.800.766.7000 Fax: 1.800.926.1166 www.fishersci.com 1 Fisherbrand 8mm Standard Opening Screw Thread Vials 8mm Standard Opening Screw Thread
Micro Insert is used to ensure the most accurate and reliable analysis of your lab samples. Micro-Inserts are manufactured of clear glass. Different bottom shape for choosing, including flat bottom, concial bottom, and concial bottom with poly spring. Micro inserts, when used in conjunction with autosampler vials, allow for maximum sample recovery and easier sample removal because the conical shape decreases the surface area inside the vial.
Thermo Scientific™ 6mm 400µL Glass MicroSert™ Flat Bottom Insert, 500-pk. MSRP: Now: $81.00. Was: Thermo Scientific™ 6mm 400µL Glass MicroSert™ Flat Bottom Insert, 500-pk Target Flat Bottom Inserts are the economical choice for microvolume sampling. Ready-to-use; simply drop into vial for instant injections.
PLASTIC BOTTLES . All PLASTIC BOTTLES; Cosmo (Bullet) Rounds 6mm Clear Glass Insert with Polyspring, Volume 200ul, Pack of 100 ... 250uL Micro-Insert, conical ...
1.Polyspring inserts are self-centering with a spring to provide a cushion against needle contact. 2.These types of small volume inserts are available for use with 2ml Autosampler screw top vials. Made with high precision, these inserts offer reliability and will not contaminate your samples. Simply drop them into your autosampler vials for use. 3.